AREA OF USAGE / UTILITY:

Torch Tar Silver Paint is used to protect and beautify smooth asphalt roofs from UV rays.

It used to protect metal structure as it is an anti-rust and corrosion coating.
It is used on asphalt roofs, metal roofs, metal walls, masonry walls etc. to reflect sunrays in order to reduce air-conditioning costs in summer.

KEY FEATURES:

1. Torch Tar silver paint is easy to apply- no heating and thinning required.
2. Deflects UV rays, it is highly reflective, up to 70% of sunrays gets deflected, thus prevents degradation of membrane due to exposure to sunlight.
3. Facilitates heat insulation.
4. Reduces surface temperature by as much as 8-100C, thus reducing heating and cooling costs.
5. Less maintenance costs of roofs etc.
6. Capable of withstanding thermal & structural movements in roofs and walls.
7. High Coverage, 1kg covers 8-10 m2.
8. Easy to apply like other paints.

PACKING:  Available in 1kg, 4kg and 20kg drums.

STORAGE: Contains petroleum solvents; flammable; keep away from open fire, sparks or other ignition sources. Store in air tight containers in cool, dry place, under shed away from heat and moisture.

SHELF LIFE: 12 months in original unopened sealed condition.

SURFACE PREPARATION: -

• Remove dust, flakes, oil, grease or other foreign particles by jet or dry air and clean the surface before applying Torch Tar Silver Paint.
• Undercoat is necessary for its application.

MATERIAL PREPARATION:

• Stir Torch Tar Silver Paint by a slow speed mixture (approx.400rpm) fitted with a suitable mixing paddle to ensure thorough dispersion of Aluminum for a uniform finish.

APPLICATION OF MATERIAL

• Apply Torch Tar Silver Paint by a brush on the prepared surface.
• Allow it to dry for 5 hours.
• Torch Tar Silver Paint can be applied over old painted surface without burning off or scrapping, provided the old surface is not in a flaky condition.

ECOLOGY, HEALTH & SAFETY

• Avoid contact with skin / eyes, and avoid swallowing.

• Ensure adequate ventilation and avoid inhalation of vapor.

• Wear suitable protective clothing, gloves and eye protection.

• In case of skin contact, rinse with plenty of clean water, then cleanse with soap and

water. Do not use solvent to clean the contacted area.

• In case of eye contact, wash with plenty of clean water and seek medical advice.

• If swallowed, seek medical attention immediately. Do not induce vomiting.