Silver Paint
Get the professional solution for your requirement!
Fill the form below to book a free site evaluation by an Torchtar Service expert.
Product Overview
AREA OF USAGE / UTILITY:
Torch Tar Silver Paint is used to protect and beautify smooth asphalt roofs from UV rays.
It used to protect metal structure as it is an anti-rust and corrosion coating.
It is used on asphalt roofs, metal roofs, metal walls, masonry walls etc. to reflect sunrays in order to reduce air-conditioning costs in summer.
KEY FEATURES:
- Torch Tar silver paint is easy to apply- no heating and thinning required.
- Deflects UV rays, it is highly reflective, up to 70% of sunrays gets deflected, thus prevents degradation of membrane due to exposure to sunlight.
- Facilitates heat insulation.
- Reduces surface temperature by as much as 8-100C, thus reducing heating and cooling costs.
- Less maintenance costs of roofs etc.
- Capable of withstanding thermal & structural movements in roofs and walls.
- High Coverage, 1kg covers 8-10 m2.
- Easy to apply like other paints.
Product Details
| Colour | White / Light Grey |
| Reinforcement | Not specified |
| Dimensions |
Thickness: 1.2 mm / 1.5 mm Roll Size: 2.4 m, 1.2 m or 2 m width × 20 m length |
| Finishes | Sand Finish / Plain Finish / Fleece Back Finish |
| Shelf Life | 24 Months |
| Storage Conditions | Store rolls horizontally on a flat surface in a cool, dry and shaded area. Protect from direct sunlight, UV exposure, heat sources, open flames and extreme temperatures. |
| Product Type | Flexible, Heat-Weldable TPO Membrane |
| Temperature Resistance | -40°C to +110°C |
| Weight | Less than 1.5 kg/m² |
| UV & Weather Resistance | UV & Weather Resistant |
| Installation | Heat-Weldable Along Edges and Corners |
Additional information
| Sl.No.Specifications | Characteristics |
|---|---|
| 1. Consistency | Smooth, Uniform, Brush able |
| 2. DFT | 30-40 Microns |
| 3. Finish | Silver |
| 4. Drying Time, Hr | 5 |
| 5. Specific Gravity | 0.96 |
| 6. Coverage | : |
| i)Metal Surface | 9-11m2/L |
| ii) Bituminous Surface | 7-9m2/L |
| iii) Concrete Surface | 5-7m2/L |
Product Application
SURFACE PREPARATION: –
- Remove dust, flakes, oil, grease or other foreign particles by jet or dry air and clean the surface before applying Torch Tar Silver Paint.
- Undercoat is necessary for its application.
MATERIAL PREPARATION:
- Stir Torch Tar Silver Paint by a slow speed mixture (approx.400rpm) fitted with a suitable mixing paddle to ensure thorough dispersion of Aluminum for a uniform finish.
APPLICATION OF MATERIAL
- Apply Torch Tar Silver Paint by a brush on the prepared surface.
- Allow it to dry for 5 hours.
- Torch Tar Silver Paint can be applied over old painted surface without burning off or scrapping, provided the old surface is not in a flaky condition.
ECOLOGY, HEALTH & SAFETY
• Avoid contact with skin / eyes, and avoid swallowing.
• Ensure adequate ventilation and avoid inhalation of vapor.
• Wear suitable protective clothing, gloves and eye protection.
• In case of skin contact, rinse with plenty of clean water, then cleanse with soap and
water. Do not use solvent to clean the contacted area.
• In case of eye contact, wash with plenty of clean water and seek medical advice.
• If swallowed, seek medical attention immediately. Do not induce vomiting.
