DPC Liquid Membrane
DPC Liquid Membrane
Protect a property from rising damp with an extremely durable damp proof course (DPC). TT DPC membranes prevent dampness in the wall structure along with the associated issues with mould and damage to internal decoration. A damp proof course (DPC) is a physical barrier that prevents water from moving up a wall. Our DPC Membranes are specially formulated so that they may provide excellent resistance to radon gases and have high puncture tear resistance. The coating dries to form a black flexible protective film. The finished film forms a tough barrier to vapor transmission.
Get the professional solution for your requirement!
Fill the form below to book a free site evaluation by an Torchtar Service expert.
Product Overview
AREA OF USAGE / UTILITY:
- Damp (Rising, Penetrating and Condensation)
- Mould
- Salt Contamination
- Fractured Plastering
- Discolored Walls
- Peeling Paint and Wallpaper
- Fungal Decay
- Thermal Heat Loss
- Avoids Unpleasant Musty Odors
- Avoids Decreasing Value of Property
- Prevents Structural Problems
- Prevents Damp-related Health Issues
KEY FEATURES:
- Resists the attack of salts like chlorides and sulphates that are present in the soil.
- Easy to apply
- Cold applied
- Adheres to concrete
- Can be applied in closed or confined spaces
- Water-based
- Non-flammable
- Versatile
- Economical
Product Details
Additional information
| Colour/Form | Black, Liquid |
|---|---|
| Packaging | Available in 20 Kg drums |
| Shelf Life | 12 Months from the date of manufacture whenmaintain in protected storage in original unopened sealed condition. |
| Storage Conditions | Store under cover out of direct sunlight and protect from extremes of temperature. In tropical climates the product must be stored in an airconditioned environment. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. |
Product Application
For Full-Surface Waterproofing.
TT DPC Coat is applied by brush or roller in two layers. The first layer is applied 2-3 hours after priming and while primer is still tacky. The second layer should be applied crosswise after 8-24 hours, depending on the weather conditions.
Application Method For Local waterproofing of cracks.
In this case, the primer is applied on the substrate only along the cracks, to a width of 10-12 cm. Two three hours after priming, the first layer is applied and, while is still fresh, a 10 cm wide polyester fleece strip (60 g/m2 or 120 g/m2) is embedded lengthwise. Two extra layers are applied along the cracks, completely covering the reinforcement
